Excavadora de orugas John Deere 470G LC 2014 (2023)

FAQs

What is the operating weight of a 470g? ›

Operating Weight: 51 218 kg (112,916 lb.)

Lifting Capacity Over Front at Ground Level 7.5-m (25 ft.) Reach (with power boost) 14 573 kg (31,155 lb.)

Operating weight

51 218 kg (112,916 lb.)

With Full Fuel Tank; 79-kg (175 lb.) Operator; 2.34-m3 (3.06 cu. yd.), 1370-mm (54 in.), 2031-kg (4,478 lb.) Bucket; 3.9-m (12 ft.

The Kubota excavators can lift from 480kg to 1.5t depending on the position of the boom and arm.

3t diggers are too wide to pass through a standard doorway, although they are very useful machines if you are working around the front of a property that has wider access, for instance renovating a driveway. This Kubota KX027 3t digger can lift approximately 1.4t in its optimum boom position.

8R, 8RT and 8RX Tractors can be equipped with a rear hitch to handle up to 20,000 lb (9072 kg).

What is the lifting capacity of a John Deere 450 excavator? ›

106,180 lb. Lift Capacity.............................................. 29,900 lb.

Rear Wheel Weight, 495 lbs, for John Deere® Tractor, R167152

Make Sure it Fits!

John Deere suitcase weights are available in 41 lb or 70 lb

One of the best ways to use suitcase weights for tractors is with a weight bracket, though some ballast boxes can allow suitcase weights to hang off the top edge.

Can Bobcat Attachments Be Used with John Deere Skid Steers? You can convert Bobcat attachments to use them on any skid steer. This includes all well-known brands, such as John Deere, Caterpillar, Kubota, New Holland, Mustang, Gehl, Takeuchi and more.

Smooth. Trench, dig, excavate and more with this versatile mini-excavator bucket attachment. This excavator bucket has a capacity between 1.4 and 3.2 cubic yards.

Equipped with a 450kW Volvo D16 engine that delivers high torque at low rev/min, Volvo CE say the machine is designed for fast and efficient production even in the harshest applications.

Can I lift my truck with a 2 Ton jack? ›

For most simple jobs, a 2-ton jack will work; however, investing in one with more capability is never a bad idea. The selected jack's ideal capacity should reach about three quarters of the vehicle's overall weight. More often than not, weight ratings are indicated on a sticker located in the driver's side door jam.

Explore the Features

The CASE CX65D 6 tonne excavator cab version can be equipped with rubber or steel tracks and can deliver a digging depth of up to 4200 mm.

Digger for hire, the 6,000kg (6 ton) excavator is capable of larger construction site clearance jobs and can load 8- wheeler tipper lorries on flat standing ground, as well as discharge into then centre of the 8-wheeler's body.

All of our 8 Ton Diggers now come with green seat belt beacons and we also stock Pallet Forks for our 8 Ton Machines which enable two tons to be lifted without any danger of instability at full out reach and off set to the tracks.

However, other aspects of the machine, like the transmission, clutches, hydraulics, and more may need to be replaced to keep the tractor in good running order. A general rule of thumb is that 2,000 to 2,500 hours is well broken-in while anything above 35,000 hours is considered high.

What is the most powerful tractor pulling? ›

Tractor pulling is called “The World's Most Powerful Motor Sport” with some machines producing in excess of 9000 horsepower.

"You have to look around and watch around." "Some guys spend $12,000 just in the motor," Walter said. In the pro-stock class, it isn't unheard of to spend upwards of $60,000. Though the activity can gobble up plenty of cash, the winning pull doesn't always come from the most expensive machine.

Lumping all makes of backhoes together by their general digging depth classes mentioned before, there are two lift capacity ranges: 14- to 15-foot digging depth class backhoes have lift capacities ranging from 5,500 to 8,200 pounds. 15- to 16-foot depth class models have lift capacities from 6,300 to 8,800 pounds.

Full size compact tractors are 40 to 60 horsepower, weigh close to 4,000 lb. and will lift over 2,000 lb with the loader. Full size compacts are big enough to handle hay equipment and 6-7' implements with ease.

Tractor Hydraulic Lift Shaft at Rs 800/piece | Hydraulic Lift Shaft in New Delhi | ID: 13754058512.

740 Self-Leveling Specifications: Maximum lift height: 14' 1” • Digging depth: 12” • Roll-back angle at ground level: 40 degrees • Dump angle at maximum height: 70 degrees • Reach at ground level: 8' 2” • Breakout force at pivot pin: 7,647 lbs. Lift capacity to full height at pivot pin: 4,083 lbs.

Each of the letters represents a set level of features, with G as the economy model and the newest addition to the Deere lineup; P with the same advanced features introduced with launch of the L Series models; and the X-tier, meant to denote the company's hybrid diesel-electric technology and most advanced features.

In place of the letter that indicated the model's generation is one of three letters meant to signify its performance and technology load-out. So, on the midsize loaders, the L has been replaced with either a G, P or X to denote the loader's performance tier.

What replaced the John Deere G? ›

The last Model “G” was built in February 1953, and shipped to Greene, Iowa, about 50 miles north of Waterloo. A few months later the “G” would officially be replaced by the Model 70 as John Deere's largest row-crop tractor.

Weight distribution

A tractor engine is very heavy and is located at the front of a tractor, potentially causing it to tip nose first. Larger heavier wheels at the rear of the tractor distribute this weight more evenly to counter a heavy front.

One 50-lb plastic-shell rear wheel weight may be installed on each rear wheel to provide extra traction and stability. The outer shell is molded of tough polyethylene plastic filled with a heavy granular material that contains a high iron percentage.

The tractors weights provide balance to the entire assembly. The back wheels of a tractor are large than the front wheels. The tractor wheel weights also provide increased ground traction so as to avoid slipping. The wheel weights also decreases the centre of gravity as a tractor carries heavy payloads.

Tractor suitcase weights are common items used to add weight for traction and grip – also known as ballast – to your sub-compact, compact, and standard tractor.

These are also by far the heaviest, with each tire weighing 1,000 pounds on average. That would mean your tires contribute 4,000 pounds to the load of your tractor.

396-hp excavator ranges in operating weight from 105,400 to 117,500 lbs. The 349E features a 396-net-hp Cat C13 ACERT engine that uses the Cat Clean Emissions Module (CEM) to meet EPA Tier 4 Interim emissions standards.

Updated 336 Caterpillar excavator has an operating weight of 81,200 pounds and is powered by a 302-horsepower Cat C7. 1 diesel engine. Maximum digging depth is 24 feet 8 inches, and maximum loading height is 23 feet 3 inches with the standard 21-foot-4-inch boom and 10-foot-6-inch stick.

The smallest models offer 13 horsepower engines and a digging depth of more than 5½ feet. The biggest engine mini hydraulic excavators can give you nearly 70 hp of net power and the ability to dig nearly three times as far: more than 15 feet.

What is the largest cat excavator? ›

Caterpillar 6090 FS is currently the biggest excavator in the world, weighing 1,000 tonnes.

Kobelco SK380SRLC 36 Tonne Large Excavator 12.39 Tonne Lift Capacity.

Get more in-depth insight with Caterpillar 301.6 digger specifications. See information, like: Weight: 1.96t – Transport length: 3.86m – Transport width: 0.99m – Transport height: 2.31m – Bucket capacity: 0.022m³ – Track width: 230mm and more.

Standard excavators are classified as machines that are larger than 10 tons but aren't retrofitted for any type of specialty work. While there are wide ranges in sizes for these machines, the 15 ton is the most popular standard rental.

Small excavators, often referred to as compacts or minis, are excavators designed to be used in hard-to-reach areas and for jobs that don't require too much power. Due to their small size, they are one of the most versatile types of excavators.

Simply put, no, an excavator can't unscrew itself. While it's an online myth that an excavator will unscrew itself after 16 rotations to the left, this isn't true. An excavator can't unscrew itself from the body on which it is built, as they are not built on a screw.